Samurai 4WD L4-1324cc 1.3L SOHC 5 Carb 8V (1986)
Brake Pedal Assy: Testing and Inspection
Fig. 6 Measuring pedal arm to wall clearance
1.
Start engine, then depress brake pedal a few times.
2.
Apply approximately 66 lbs. load to brake pedal, and measure pedal arm to wall clearance, ``B,'' Fig. 6.
3.
Clearance should not exceed 2.95 inch (75 mm).
4.
Possible causes for a low pedal are:
a. Worn rear brake shoes.
b. Brake lines need bleeding.
c. Booster pushrod out of alignment.
d. Rear brake shoes malfunctioning.
