Samurai 4WD L4-1324cc 1.3L SOHC 5 Carb 8V (1986)
Fig. 3 Adjusting piston rod length
d. Turn tool upside down and place on booster, Fig. 3. Adjust booster piston rod length until rod end contacts piston head.
e. Clearance should be 0.004-0.020 inch (0.1-0.5 mm).
6.
Install reservoir on master cylinder, then reservoir connector screw.
7.
Install master cylinder on studs, then mounting nuts.
8.
Connect hydraulic lines.
9.
Fill reservoir with brake fluid.
