suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Speedometer - Cable Service|Page 1928 > < Speedometer - Cable Service|Page 1922
Page 1
background image

Speedometer Cable: All Technical Service Bulletins
Speedometer - Cable Service

TSB No. TS 7-02 07031
Section Title:

Miscellaneous

Division:

Automotive

Category:

Technical

SUBJECT:

SERVICING OF SPEEDOMETER CABLE

MODEL:

SAMURAI

YEAR:

ALL

CONDITION:

Brokens speedometer cable.

CAUSE:

Improper routing of cable.

CORRECTION:

Follow procedure outlined below.

Caution:

Improper routing of speedometer cable can cause premature cable breakage. To avoid damage be sure there is no sharp cable
bend. For proper installation follow the procedure below.

SPEEDOMETER CABLE REMOVAL PROCEDURE

1.

Disconnect negative battery cable from battery.

2.

Remove instrument lower cover.

3.

Remove steering column bolts.

4.

Remove "CHECK ENGINE" light cancel switch.

5.

Remove combination meter screws.

6.

Remove combination meter assembly from instrument panel and disconnect wiring connectors and speedometer cable.

Caution:

When removing combination meter be sure not to damage hazard warning switch. To facilitate removal operation, pull the steering

Speedometer - Cable Service|Page 1928 > < Speedometer - Cable Service|Page 1922