Sidekick L4-1324cc 1.3L SOHC 5 Carb 8V (1989)
g) To take up slack of timing belt, turn crankshaft two rotations clockwise after installing it. After making sure that belt is free from slack, tighten
tensioner stud first and then tensioner bolt to each specified torque. Then confirm again that two sets of marks are aligned respectively.
Tightening Torque:
Tensioner stud 9-12 N.m (0.9-1.2 kg-m, 7.0-8.5 ft-lb)
Tensioner bolt 24-30 N.m (2.4-3.0 kg-m, 17.5-21.5 ft-lb)
4. Install outside cover on timing belt.
5. Install crankshaft pulley
6. Install water pump pulley and drive belt.