Sidekick L4-1324cc 1.3L SOHC 5 Carb 8V (1989)
e) Turn crankshaft clockwise, fitting 17 mm wrench to crank timing belt pulley bolt, and align punch mark on timing belt pulley with the arrow
mark on oil pump as shown in below figure.
f) With two sets of marks aligned, install timing belt on two pulleys in such a way that the drive side of belt is free of any slack, and with
tensioner plate pushed up by finger.
NOTE:
^
When installing timing belt, match arrow mark on timing belt with rotating direction of crankshaft.
^
In this state, No.4 piston is at top dead center of compression stroke.
