suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Lower Steering Shaft - Updated Part|Page 1706 > < Lower Steering Shaft - Updated Part|Page 1704
Page 4
background image

1)

Install new joint boot to upper joint aligning it in direction of joint steering yoke.

2)

Adhere boot to both surfaces of bolt flanges and to bolt heads with instantaneous adhesive as shown at left to prevent foreign materials from
entering.

3)

Pull straps of joint boot and pass bolts through them.

CAUTION:

Be careful not to pull straps excessively. They will break.

NOTE:

Instantaneous adhesive must be applicable for both metal and rubber.

4)

Adhere straps of boot to upper joint with instantaneous adhesive as shown.

CAUTION:

Lower Steering Shaft - Updated Part|Page 1706 > < Lower Steering Shaft - Updated Part|Page 1704