suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Coil Spring|Page 1728 > < Stabilizer Bar, Sway Control|Service and Repair
Page 1
background image

Suspension Spring ( Coil / Leaf ): Service and Repair
Front Coil Spring

1.

Raise and support vehicle. Remove wheels.

2.

Remove locking hub, then the front axle shaft circlip and washer.

3.

Remove brake caliper assembly, then suspend out of way.

4.

Remove brake disc, then the stabilizer ball joint.

5.

Using tie rod end remover No. J21687-02 or equivalent, remove tie rod end.

6.

Using a suitable jack, support the suspension arm, then remove the lower strut bracket from the suspension arm.

7.

Remove ball stud castle nut from ball stud

8.

Lower jack, then remove steering knuckle and wheel hub assembly.

9.

Remove coil spring.

10.

Reverse procedure to install. Torque to specifications.

Front Coil Spring|Page 1728 > < Stabilizer Bar, Sway Control|Service and Repair