suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

4WD Switch|Testing and Inspection|Page 2087 > < 4WD Low Switch (M/T)|Page 2081
Page 1
background image

4WD Switch: Testing and Inspection

1.

Turn ignition switch Off, then raise and support vehicle.

2.

Disconnect 4WD switch connector, then connect ohmmeter to connector terminals.

3.

Check that 4WD switch turns On at only 4WD (4H and 4L) position.

4.

Replace 4WD switch if not as specified.

4WD Switch|Testing and Inspection|Page 2087 > < 4WD Low Switch (M/T)|Page 2081