Sidekick 2WD L4-1590cc 1.6L SOHC 0 TBI 8V (1992)
Vacuum Brake Booster: Service and Repair
Removal
1.
Remove master cylinder from booster as outlined under MASTER CYLINDER.
2.
Disconnect pushrod clevis from brake pedal arm.
3.
Disconnect vacuum hose from booster.
4.
Remove booster attaching nuts, then booster assembly.
5.
Reverse procedure to install. Check brake pedal height and pedal travel as outlined under ADJUSTMENT PROCEDURES/BRAKE PEDAL
HEIGHT and BRAKE PEDAL TRAVEL CHECK.
