Sidekick 2WD L4-1590cc 1.6L SOHC 0 TBI 8V (1992)
FASTENER TORQUE
3.5 Nm (0.35 kg-m, 2.5 lb-ft)
7.
Check that there is no continuity between terminals 0 and D when 0.4 mm (0.016 in) thickness gauge is inserted.
8.
Check that there is continuity between terminals C and D when 0.2 mm (0.008 in) thickness gauge is inserted.
9.
If check result is unsatisfactory in steps 7 and 8, it means that installation angle of TPS is not adjusted properly. Therefore, start all over again
from step 1.
CAUTION: As throttle stop screw is factory adjusted precisely, don't remove or adjust it.
10.
Connect connector to TPS securely, connect throttle opener vacuum hose to VSV and connect battery negative cable.