suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Throttle Body|Removal and Installation|Page 1534 > < Throttle Body|Removal and Installation|Page 1532
Page 2
background image

Cleaning Passages

CLEANING

NOTES:
^ The TPS, fuel pressure regulator, fuel injector, air valve, throttle opener or other components containing rubber must not be placed in a solvent or

cleaner bath. A chemical reaction will cause these parts to swell, harden or get distorted.

^ Don't put drills or wires into passages for cleaning. It causes damages in passages.

- Clean passages and fuel injector chamber by blowing compressed air.

Installing Gasket

ASSEMBLY

- Install new gasket to lower body.
- Install upper body on gasket, using care not to cause gasket to slip out of place.

Throttle Body|Removal and Installation|Page 1534 > < Throttle Body|Removal and Installation|Page 1532