Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Brake Master Cylinder: Service and Repair
Overhaul
NOTE: Replace all components included in repair kits to service this master cylinder. Lubricate rubber parts with clean, fresh brake fluid to ease
assembly. Do not use lubricated shop air on brake parts as damage to rubber components may result. If any hydraulic component is removed or brake
line disconnected, bleed the brake system. The torque values specified are for dry, unlubricated fasteners.
DISASSEMBLY
1. Remove circlip.
2. Remove primary piston.
3. Remove secondary piston by blowing compressed air into hole for rear brake pipe. Be cautious during removal as secondary piston jumps out.