Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Temperature Sensor (Gauge): Testing and Inspection
Fig. 2 Coolant Temperature Meter & Gauge Unit Wiring
1. Disconnect Yellow/White lead wire going to gauge unit installed on intake manifold, Fig. 2.
Fig. 3 Coolant Temperature Meter Inspection
2. Using a 12 volt (3.4 W) bulb, ground wire as shown, Fig. 3.
3. Turn ignition On. Ensure bulb is lighted with meter pointer wavering several seconds after.
4. If meter is faulty, replace as necessary.