Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
8. Install timing chain tensioner adjuster No.2 with gasket.
Tightening Torque:
(a): 11 Nm (1,1 kg-m, 8.0 ft. lbs.).
(b): 45 Nm (4.5 kg-m, 33.0 ft. lbs.).
9. Pull out stopper form timing chain tensioner adjuster No.2.
10. Turn crankshaft two rotations clockwise then align timing mark on crankshaft and timing mark on cylinder block as shown in figure. Check that
timing marks of cylinder head and cylinder block are in match with match marks on sprockets respectively.
11. Apply oil to timing chains, tensioner, tensioner adjusters, sprockets and guides.
12. Install timing chain cover.
13. Install cylinder head cover.
14. Install oil pan and oil pump strainer.
15. Install cooling system and other parts.
16. Refill cooling system with coolant, front differential with gear oil and engine with engine oil.
17. Verify that there is no water leakage and oil leakage at each connection.
18. Check wheel alignment.
Inspection
INSPECTION
