Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
4) When an abnormality in the system is detected, "ABS" warning lamp lights and the area where that abnormality lies is stored in the memory of
EEPROM in ABS control module.
5) When Diag. switch terminal of DIAG-2 connector (monitor connector) is grounded, the abnormal area is output as DTC from Diag. output
terminal. When DTC output is normal DTC 12 or history DTC only, it is also indicated by flashing of "ABS" warning lamp.
For procedure to clear all DTC's, refer to the item "Diagnostic Trouble Code Clearance".
Fail-Safe Function
When an abnormality occurs (an abnormal DTC is detected), ABS control module turns OFF the fail-safe relay which supplies power to ABS
hydraulic unit. Thus, with ABS not operating, brakes function just like the brake system of the vehicle not equipped with ABS.