Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
NORMAL VOLTAGE VALUES
RESISTANCE CHECK
1) Disconnect ECM couplers from ECM with ignition switch OFF.
CAUTION: Never touch terminals ECM itself connect voltmeter or ohmmeter.
2) Check resistance between each pair of terminals of disconnected couplers as listed in following table.
CAUTION:
-
Be sure to connect ohmmeter probe from wire harness side of coupler.
-
Be sure to turn OFF ignition switch for this check.
-
Resistance in table represents that when parts temperature is 2O°C (68°F).
