Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
Control Module: Testing and Inspection
INSPECTION OF TCM AND ITS CIRCUITS
TCM and its circuits can be checked at TCM wiring couplers by measuring voltage and resistance.
CAUTION: TCM cannot be checked by itself. It is strictly prohibited to connect voltmeter or ohmmeter to TCM with couplers
disconnected from it.
VOLTAGE CHECK
1) Remove TCM (with ECM) from body.
2) Connect TCM and ECM couplers to TCM and ECM.
3) Check voltage at each terminal of couplers connected.
NOTE: As each terminal voltage is affected by the battery voltage, confirm that it is 11V or more when ignition switch is ON.
TCM CONNECTOR IDENTIFICATION