Sidekick 4 Door 4WD L4-1.8L DOHC MFI 16V (1996)
INSTALLATION
1. Make sure that O-ring and case have not been damaged.
2. Apply grease to lip portion of new oil seal and install it until bottom. Special Tool (A) 09916-46010 may be used for installation.
3. Inspect speedometer driven gear for abnormal wear of gear teeth or bend of shaft portion and replace it if necessary.
4. Insert driven gear to case and fix spring pin (type-1 only), then make sure its smooth rotation.
5. Install case assembly to transfer and connect cable as it was.
Tightening Torque (a) 10 Nm (90 inch lbs.)
6. Make sure oil level is in specification.
