suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Intake Air Temperature Sensor|Specifications|Page 1103
Page 1
background image

Intake Air Temperature Sensor: Service and Repair

1.

Disconnect battery ground cable.

2.

Disconnect Air Temperature Sensor connector.

3.

Remove Air Temperature Sensor from intake manifold.

4.

Clean intake manifold and ATS mating surfaces.

5.

On all except Swift, install ATS with new gasket, torque to 25.5--39.5 ft.lbs.

6.

On Swift, install ATS with new gasket, torque to 9.5--12 FT.lbs. 

Manifold Pressure/Vacuum Sensor > < Intake Air Temperature Sensor|Specifications|Page 1103