Sidekick 4WD L4-1590cc 1.6L SOHC 0 TBI 8V (1990)
Vehicle Speed Sensor: Testing and Inspection
1.
Disconnect battery ground cable.
2.
Remove instrument cluster from instrument panel.
3.
Connect ohmmeter between GND screw and RSW screw on Swift and Samurai, or between E screw and RS screw on Sidekick.
4.
Turn cable joint with a screwdriver. Ohmmeter indicator should move back and forth between zero and infinity four times while cable joint is
turned one full revolution.
5.
If results are not specified, replace speedometer.