Sidekick JS 2D 2WD L4-1.6L (1998)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor
Removal
NOTE: Front wheel speed sensor is serviceable only as an assembly.
1) Disconnect battery negative cable from battery.
2) Hoist vehicle.
3) Disconnect sensor connector.
4) Remove front wheel speed sensor from steering knuckle.
Installation
1) Before installation, check following:
-
Check to make sure that sensor tooth is free form any metal particles.
2) Install front wheel sensor to steering knuckle.
3) Tighten sensor bolt to specified torque.
Tightening Torque
(a): 10 Nm (1.0 kg-m, 7.5 ft. lbs.)
4) Connect sensor connector securely.
5) Lower hoist and connect battery negative cable to battery.
