suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Diagnostic Trouble Code Tests and Associated Procedures|Page 2358 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 2356
Page 34
background image

INSPECTION PROCEDURE

FAILURE CONDITION: 

DTC 24 can be set when the vehicle is not in an Antilock Brake System (ABS) stop. If the right rear wheel speed is less than 1/2 of the vehicle's
reference speed and the vehicle's reference speed is greater than 8 km/h (5 mph), a malfunction exists.
DTC 28 can be set when the brake is off. The purpose of this test is to detect a situation in which the right rear wheel acceleration or deceleration is
beyond specified limits.
DTC 35 can be set anytime. If the Electronic Brake Control Module (EBCM) detects an open, or short to voltage or ground in CKT(s) "Y" (and "W")
or CKT(s) "Y/B" (and "B"), a malfunction exists.

Diagnostic Trouble Code Tests and Associated Procedures|Page 2358 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 2356