Sidekick JS 2D 2WD L4-1.6L (1998)
INSTALLATION
1. When using new grommets, lubricate them with the same fluid as the one to fill reservoir with. Then press-fit grommets to master cylinder.
Grommets must be seated in place.
2. Install reservoir and drive in reservoir pin.
NOTE: Drive in reservoir pin till both of its ends at the right and left or reservoir becomes the same length.
3. Connect reservoir lead wire.
4. Fill reservoir with specified fluid.
5. Upon completion of installation, check for fluid leakage.
Filling Reservoir
CAUTION: Do not use shock absorber fluid or any other fluid which
