Sidekick JS 2D 2WD L4-1.6L (1998)
2) Tighten solenoid mounting bolts.
Tightening Torque
(b): 4.5 Nm (0.45 kg-m, 3.5 ft. lbs.)
3) Connect solenoid harness connector.
4) Connect battery negative cable to battery.
5) Bleed brake system. Refer to "Bleeding System.
Solenoid Valve Body
1. Disconnect battery ground cable.
2. Disconnect solenoid electrical connector. Remove Torx head bolts, then the solenoid assembly.
Fig. 12 Exploded View Of ABS Modulator Assembly
3. Reverse procedure to install, torque ABS modulator assembly Torx head bolts, "A" to 3 ft lbs. and "B" to 3.5 ft. lbs., Fig. 12.
