Sidekick JS 2D 2WD L4-1.6L (1998)
Coolant Reservoir: Service and Repair
COOLANT LEVEL
To check level, look at "see-through" reservoir tank. It is not necessary to remove radiator cap to check coolant level.
WARNING:
To help avoid danger of being burned:
^
do not remove reservoir tank cap while coolant is "boiling", and
^
do not remove radiator cap while engine and radiator are still hot.
Scalding fluid and steam can be blown out under pressure if either cap is taken off too soon. When engine is cool, check coolant level in reservoir
tank. A normal coolant level should be between "FULL" and "LOW" marks on reservoir tank. If coolant level is below "LOW" mark, remove
reservoir tank cap and add proper coolant to tank to bring coolant level up to "FULL" mark. Then, reinstall cap.
NOTE:
^
If proper quality antifreeze is used, there is no need to add extra inhibitors or additives that claim to improve system. They may be harmful to
proper operation of system, and are unnecessary expense.
^
When installing reservoir tank cap, align arrow marks on tank and cap.
