Sidekick JS 2D 2WD L4-1.6L (1998)
8. Install camshaft oil seal.
After applying engine oil to oil seal lip, press-fit camshaft oil seal till oil seal surface becomes flush with housing surface.
9. Install rocker arm shaft plug and timing belt inside cover. Then tighten rocker arm shaft plug to specified torque.
Tightening Torque (a): 33 Nm (24.0 ft. lbs.)
10. Install camshaft timing belt pulley to camshaft while fitting pin on camshaft into slot at "E" mark.
11. Using special tool, tighten pulley bolt to specified torque.
Tightening Torque (a): 60 Nm (43.5 ft. lbs.)
Special Tool (A): 09917-68220
12. Install belt tensioner, timing belt, outside cover, crankshaft pulley and water pump belt.
