Sidekick JS 2D 2WD L4-1.6L (1998)
-
Tighten stiffeners bolts to specified torque.
Tightening Torque (a): 50 Nm (36.5 ft. lbs.)
-
Tighten fuel feed pipe flare nut to specified torque. Be sure to use back-up wrench.
Tightening Torque (a): 45 Nm (32.5 ft. lbs.)
-
Adjust accelerator cable play and A/T kickdown cable (for 3 A/T model) or A/T throttle cable (for 4 A/T model) play.
-
Check to ensure that all removed parts are back in place. Reinstall any necessary parts which have not been reinstalled.
-
Refill cooling system.
-
Upon completion of installation, turn ignition switch ON but engine OFF and check for fuel leaks.
-
Finally, start engine and check for engine coolant leaks.