suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Ignitor <--> [Ignition Control Module] > < Ignition Cable|Specifications|Page 1835
Page 1
background image

Ignition Coil: Testing and Inspection

1) Remove distributor cap and disconnect distributor coupler.
2) Measure primary and secondary coil circuit resistances.

Ignition coil resistance at 20°C (68°F)
Primary circuit 0.7 - 0.9 Ohms
Secondary circuit 13 - 18 k Ohms
 

If check result is not satisfactory, replace distributor.

Ignitor <--> [Ignition Control Module] > < Ignition Cable|Specifications|Page 1835