Sidekick JS 2D 2WD L4-1.6L (1998)
1. Install bush into idler arm using special tool (B) and special tool (C).
Special Tool:
(B): 09943-88211
(C): 09940-53111 or equivalents.
2. Insert upper washer, arm and lower washer into idler arm shaft in that order and tighten lock nut to specified torque.
Tightening Torque (a): 75 Nm (54.5 ft. lbs.)
3. Connect idler arm to center link. Tighten castle nut until holes for split pin are aligned but only within specified torque.
Tightening Torque (b): 50 Nm (36.5 ft. lbs.)
4. Bend split pin as shown.
