suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Power Steering Pump|Removal and Installation|Page 2772 > < Power Steering Pump|Removal and Installation|Page 2770
Page 7
background image

^

Check fluid passage of relief valve and orifice of connector for obstruction (clogged).

^

Check sliding surface of relief valve for wear and damage.

^

Check free length of relief valve spring.

Free length: 

Standard 27.2 mm (1.07 inch) 
Limit 24.2 mm (0.96 inch)
 

Replace if any defective is found.

ASSEMBLY 

Reverse DISASSEMBLY procedure for assembly, noting the following.,

1. Apply grease to oil seal lip and apply power steering fluid to sliding surface of the shaft then insert pulley's shaft from oil seal side of the pump

body.

"A": Grease 99000-25010

2. Apply power steering fluid to O-rings and fit them to pump body.

Power Steering Pump|Removal and Installation|Page 2772 > < Power Steering Pump|Removal and Installation|Page 2770