Sidekick JS 2D 2WD L4-1.6L (1998)
11. Apply power steering fluid to O-ring.
12. Install O-ring to pump body.
13. Apply power steering fluid to sliding surface of pump cover and rotor.
14. Match the dowel pins to the holes of the pump cover as shown and install pump cover to pump body.
15. Gradually tighten pump cover bolts to specified torque.
NOTE: After installing pump cover, check to make sure that shaft can be turned by hand.
Tightening Torque (a): 28 Nm (2.8 kg-m, 20.0 ft. lbs.)
