Sidekick JS 2D 2WD L4-1.6L (1998)
Suspension Strut / Shock Absorber: Testing and Inspection
INSPECTION
1. Inspect for deformation or damage.
2. Inspect bushings for wear or damage.
3. Inspect for evidence of oil leakage.
Replace any defective part.
WARNING: When handling rear shock absorber in which high-pressure gas is sealed, make sure to observe the following precautions.
^
Don't disassemble it.
^
Don't put it into the fire.
^
Don't store it where it gets hot.
^
Before disposing it, be sure to drill a hole in it where shown by an arrow in the figure and let gas and oil out. Lay it down sideways for
this work.