Sidekick JS 2D 2WD L4-1.6L (1998)
7) Remove door outside weatherstrip. Lower window all the way down. Then, use a tape-wrapped putty knife (or screwdriver) to pry off weatherstrip.
CAUTION: Use a tape-wrapped putty knife (or screwdriver) to pry off weatherstrip. Use of an unwrapped tool will cause damage to
painting.
8) Remove door inner weatherstrip.
9) Remove glass bottom channel attaching screws (1).
10) Take out door glass with bottom channel (2).
11) Detach glass from bottom channel.
Installation
Reverse removal procedure to install door glass noting the following points:
-
When installing glass to bottom channel (1), coat channel with soapy water and tap it in place with a plastic hammer.
Position glass in bottom channel, as shown in the figure.
Glass bottom channel position length
"a": 398.5 mm (15.69 in.)
