suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Diagnostic Trouble Code Tests and Associated Procedures|Page 2410 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 2408
Page 8
background image

INSPECTION PROCEDURE

FAILURE CONDITION: 

DTC 16 can be set only after DTC 14 has been set. This test detects an open in the Antilock Brake System (ABS) enable relay coil circuit. An open in
this circuit will not allow the relay to be energized thus preventing voltage/current to the motors and solenoids. If this malfunction is present and the
ignition switch is turned to "LOCK" before 5 km/h (3 mph) is reached, DTC 14 is set alone.

DTC 17 - ABS Enable Relay Coil Circuit Shorted To Ground

Diagnostic Trouble Code Tests and Associated Procedures|Page 2410 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 2408