Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Brake Pad: Service and Repair
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper pin bolts.
3) Remove caliper from caliper carrier.
NOTE: Hang removed calmer with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.
Don't operate brake pedal with pads removed.
4) Remove pads.
INSTALLATION
NOTE: All brake fasteners are important attaching parts in that they could affect the performance of vital parts and systems, and/or could result in
major repair expense. They must be replaced with one of same part number or with an equivalent part if replacement becomes necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to assure proper retention of all
parts. There is to be no welding as it may result in extensive damage and weakening of the metal.
1) Install pad clips and pads.
