Brake Bleeding Procedure for Sidekick JS 2D Soft Top 2WD L4-16L (1997)
5) Repeat this operation 3 and 4 until there are no more air bubbles in hydraulic line.
6) When bubbles stop, depress and hold brake pedal and tighten bleeder plug (a).
Tightening Torque
(a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
7) Repeat steps 1 through 6 for bleeder plug (a).
8) Bleed from brake calipers/wheel cylinders as shown procedure below.
1. Fill master cylinder reservoir with brake fluid and keep at least one-half full of fluid during bleeding operation.
2. Remove bleeder plug cap.
Attach a vinyl tube to bleeder plug, and insert the other end into container.
