Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Parking Brake Cable: Service and Repair
REMOVAL
1. Remove brake drum.
2. Check the color of ring for reinstallation.
NOTE: Color ring on brake cable is for the purpose of identification.
3. Disconnect parking brake cable from brake shoe lever.
4. Disconnect brake cable from brake back plate.
NOTE: When it is necessary to remove both right and left parking brake cables, repeat above steps for the other side of the vehicle.
5. Remove cable from parking brake lever.
INSTALLATION
Install parts in reverse order of removal procedure, noting the following.
1. Install brake cable stopper ring to brake back plate securely as shown in figure.
