suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Valve Clearance > < Compression Check|Specifications|Page 943
Page 2
background image

6. Disengage clutch (to lighten starting load on engine) for Manual Transmission (M/T) model, and depress accelerator pedal all the way to make

throttle valve full-open.

7. Crank engine with fully charged battery, and read the highest pressure on compression gauge.

NOTE:  For measuring compression pressure, crank engine at least 250 r/minute by using fully charged battery.

Compression Pressure:

Standard: 1400 kPa (14.0 kg/cm2, 199.0 psi).
Limit: 1200 kPa (12.0 kg/cm2, 170.0 psi).
Maximum Difference Between Any Two Cylinders: 100 kPa (1.0 kg/cm2, 14.2 psi).

8. Carry out steps 5) through 7) on each cylinder to obtain four readings.

9. After checking, connect ignition coil coupler securely and install spark plugs.

Valve Clearance > < Compression Check|Specifications|Page 943