Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
Intake Air Temperature Sensor: Service and Repair
Removal
1) Disconnect negative cable from battery.
2) Disconnect IAT sensor coupler.
3) Remove IAT sensor from air cleaner.
Installation
Reverse removal procedure noting the following.
-
Clean mating surface of sensor and air cleaner.
-
Use new gasket.
-
Tighten IAT sensor to specified torque.
Tightening Torque
(a): 15 Nm (1.5 kg-m, 11.0 lb-ft)
-
Connect sensor coupler securely.
