Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
-
The joint connector is illustrated above.
How to Read Connector Codes and Pin Nos. (How to Use Manual):
It is possible to retrieve the location and shape of each connector from the connector code indicated in System Circuit Diagram and the position of
each pin from the connector pin No.
*
To retrieve location of connector:
Open Connector Layout Diagram and look for the same code as the connector code in question. The place where the code is found is the location
of that connector.
*
To retrieve shape or pin No.
Open List of Connectors as shown at the right in the figure above and look for the desired connector code under which the shape of that connector
is shown. This method is convenient when locating the connector in question among similar connectors. Also, by using this page, it is possible to
find the position of each pin from the connector pin No. provided.
It is helpful when retrieving pin positions in the connector for checking continuity between pins.
Symbols and Marks
