Sidekick JS 2D Soft Top 2WD L4-1.6L (1997)
If measured torque is not within specification, carry out adjustment with adjusting bolt to meet specification and check to confirm it again.
4. If worm shaft starting torque is checked all right, another check should be carried out on worm shaft operating torque in its entire operating range
(by turning worm shaft all the way to the right and left).
Worm shaft (including sector shaft) operating torque under 120 N cm (10.9 ft. lbs.)
Special Tool (A): 09944-18211 or equivalent.
If measured torque does not conform to specification, readjust worm shaft starting torque in straightforward state by means of adjusting bolt, and
then recheck worm shaft operating torque.
If specified value is not attained even after readjustment, it is advisable to replace gear box with new gear box assembly.
