suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Axle Shaft|Service and Repair|Page 2163 > < Axle Shaft|Service and Repair
Page 2
background image

NOTE:  Use care not to pull brake back plate along with shaft.

Special Tool:

(C): 09943-35511
(B): 09942-15510 or equivalents.

6. Rear axle shaft that was drawn out.

Shaft length "L"

Left side: 683.5 mm (26.9 inch)
Right side: 726.5 mm (28.6 inch) 

7. In order to remove the retainer ring from the shaft, grind with a grinder two parts of the bearing retainer ring as illustrated till it becomes thin.

CAUTION:  Be careful not to grind too far not to damage the shaft.

8. Break with a chisel the thin ground retainer ring, and it can be removed.

9. Remove bearing from shaft by using hydraulic press.

10. Remove bearing retainer.

Axle Shaft|Service and Repair|Page 2163 > < Axle Shaft|Service and Repair