suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1767 > < Initial Inspection and Diagnostic Overview|Page 1765
Page 2
background image

^

Operation sound of pump motor is heard and pulsation is felt at brake pedal.

10) If all 4-wheels cannot be checked during one ignition cycle (OFF -> ON), repeat Step 8 and 9 till all 4 wheels are checked.

If a faulty condition is found in Steps 9 and 10, replace hydraulic unit.

11) Turn ignition switch "OFF" and remove service wire from DIAG.-2 connector.

Initial Inspection and Diagnostic Overview|Page 1767 > < Initial Inspection and Diagnostic Overview|Page 1765