Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
4) When fluid pressure in the cylinder is almost depleted, retighten bleeder plug.
5) Repeat this operation until there are no more air bubbles in hydraulic line.
6) When bubbles stop, depress and hold brake pedal and tighten bleeder plug.
Tightening torque:
Front caliper: 9.0 Nm (6.5 ft lb)
Rear Cylinder: 8.0 Nm (6.0 ft lb)
7) Then attach bleeder plug cap.
8) After completing bleeding operation, apply fluid pressure to pipe line and check for leakage.