Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
NOTE: Make sure that boots are fit into groove securely.
3. Install brake flexible hose as shown and torque hose mounting bolt to 23 N m (17.0 ft. lbs.).
4. Torque wheel nuts to 95 Nm (69.0 ft. lbs.).
5. After completing the installation:
^
Fill reservoir with brake fluid and bleed brake system. See: Brake Bleeding/Service and Repair
^
Perform brake test and check each installed part for oil leakage.
