Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Brake Pad: Testing and Inspection
Check pad lining for wear. When wear exceeds limit, replace with new one.
CAUTION: Never polish pad lining with sandpaper. If lining is polished with sandpaper, hard particles of sandpaper will be deposited in lining and
may damage disc. When pad lining requires correction, replace it with a new one.
Pad thickness (lining + rim) "a"
Standard: 15.0 mm (0.590 inch)
Service limit: 7.0 mm (0.275 inch)
NOTE: When pads are removed, visually inspect caliper for brake fluid leak. Correct leaky point, if any.