suzuki Workshop Repair Guides

Suzuki Sidekick Hard Top 2WD Auto Repair Manuals & Service Guides

Initial Inspection and Diagnostic Overview|Page 1907 > < Initial Inspection and Diagnostic Overview
Page 2
background image

1) Turn ignition switch "OFF".
2) Disconnect solenoid con rector.
3) Check resistance between terminals and whether or not short-circuit between each terminal and hydraulic unit body exists.

Between terminals:
1 and 2 -
3 and 4 - 
5 and 6 - 

:2.9 - 3.2 ohms at
:20° C (68° F)

Between each terminal and unit body: or (infinity) 

If faulty condition was found, replace hydraulic unit.

Initial Inspection and Diagnostic Overview|Page 1907 > < Initial Inspection and Diagnostic Overview