Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
NOTE: Color ring on brake cable is for the purpose of identification. Use cable with the same colored ring as before removal.
2. Install brake cable spring and nipple end to parking brake shoe lever securely as shown in figure.
3. Install brake shoe assembly and drum.
4. For proper routing and secure clamping of parking brake cable.
5. Install cable to parking brake lever.
6. Upon completion of installation, adjust cable. Then check brake drum for dragging and brake system for proper performance. After removing
vehicle from hoist, brake test should be performed.
