Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Coolant Reservoir: Service and Repair
COOLANT LEVEL
To check level, lift hood and look at "see-through" coolant reservoir. It is not necessary to remove radiator cap to check coolant level.
WARNING: To help avoid danger of being burned:
^
Do not remove reservoir cap while coolant is "boiling", and
^
Do not remove radiator cap while engine and radiator are still hot. Scalding fluid and steam can be blown out under pressure if either
cap is taken off too soon.
When engine is cool, check coolant level in reservoir. A normal coolant level should be between "FULL" and "LOW" marks on reservoir. If coolant
level is below "LOW" mark, remove reservoir cap and add proper coolant to reservoir to bring coolant level up to "FULL" mark. Then, reinstall cap.
NOTE:
^
If proper quality antifreeze is used, there is no need to add extra inhibitors or additives that claim to improve system. They may be harmful to
proper operation of system, and are unnecessary expense.
^
When installing reservoir cap, align arrow marks on reservoir and cap.
