Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Camshaft: Service and Repair
Replacement
REMOVAL
1. Disconnect negative cable at battery.
2. Drain engine oil.
3. Drain coolant.
4. Remove oil pan and oil pump strainer.
5. Remove cylinder head cover.
6. Remove timing chain cover.
7. Remove 2nd timing chain.
8. Remove Camshaft Position (CMP) sensor.
9. After removing 2nd timing chain, set key on crankshaft in position as shown by turning crankshaft. This is to prevent interference between valves
and piston.